Friday, April 23, 2010
The elusive wavy stepped scarf joint. Ever since I was at my first Makers Faire and witnessed this technique, I have been dying to give it a whirl. Until now there has not been a need.
It took us several iterations to get it right, and we learned quite a bit in the process.
Every Spring the museum hosts the Oklahoma Native American Youth Language Fair (ONAYLF) as part of its ongoing commitment to the use and preservation of Native American languages. A component of this event is a poster contest that features work of students from around the country.
The yearly challenge for our department is to have all of the pieces on display and properly labeled by the events opening at 8am on Monday morning. Another difficulty for us is that the event is growing while our available space for the display dwindles due to our expansion of permanent exhibits.
Our solution was to create reusable mats for the works that can be placed in the windows of the museum's rotunda. Since the contest's format remains consistent from year to year, we were able to standardize the displays to facilitate the mounting of the works and their object labels.
The panels are made from 1/8" Sintra. White was used against the window to reflect sunlight and reduce warpage. Black on the face to create the mat spaces and to allow us to incorporate the curved design element at the top of each panel. The layers are adhered using double-sided Nitto-Denko No. 512 low VOC tape.
On the Friday prior to the fair we place the works in the mats spaces, adhere the object labels (printed ahead of time to re-positionable label stock) and place them on a panel cart. At that time we also apply 3M Command double-stick tape to the back of each panel to speed up the next phase of the process.
Come Monday morning we roll the whole lot into the Rotunda, peel off the tape backing, and place them on the sills. High-fives all around. Commence eating doughnuts.
Thursday, April 15, 2010
Made these items for the "Eggstravaganza" event at the Sam Noble Museum. A Pentaceratops ring-toss and a Saurophaganax bean -bag game.
Both are cut from 1/2" MDF. The black lines are accomplished with V-carves, the grooves the filled with black latex spray paint. Then the background coat was laid down with a large short-napped roller. The body and horns of the Penta have lines both sides - learned some registration lessons there. Next time I'll use some pins.
Due to the 40 MPH winds the Penta had to be held to the ground with some auger and rope. It wiggled a bit, but was otherwise fine.